CHANGZHOU SHUANGOU PLANK INDUSTRY CO.,LTD

Home 　About　 Production　　Products 　Products test　　Prodject　 Honors　 Information 　Join　 Contact us　 Chinese

	Metal decorating thermal insulation pane...
	Aluminium composite panel
	Color Coated Aluminiam Coil
	color aluminium plank
	Aluminium panel
	Aluminium Honeycomb panel
	Compressed Laminate Floor
	Antistaic Floor

Physical and chemical properties testing laboratory

Peel strength of: testing 180 °peel strength                   Impact: Aluminum impact of testing whether

of the numerical                                                        paint stripping, cracking phenomenon

Bending LAU: T bending test, whether aluminum             Huaquan LAU: Detection of paint adhesion,

skin cracking phenomenon                                                   there is Diaoqi

Oven: detection performance coatings and                         Color: the color detection aluminum

solid content are qualified                                                    volume color

Ganmo LAU: Ganmo coating thickness                           Luster of: measuring whether shiny

measurement, control thickness                                          brightness difference

Crop knife: Al crop volumes, detection                              Color: Cailv detected in the light of different

performance and stay-preservation                                  visual color difference whether

Solvent: testing whether the pre-treatment                      Water the pot: To detect whether paint

solution concentration standards                                       stripping in boiling water

Analysis of balance: weighing drugs, reagents, test preparation of various types of solution

2008 year meeting：27th Oct. 2008,China construction material league,aluminium composite material branch hold the second council in Shenzhen, the meeting report the finance crisis of the world infect construction material,the new stand is actualized and report the now stand of metal decorate heat preservation.

2008 finance crisis：Finance crisis of the world have been affected to entity economy,inflict heavy losses on house property.Subscribe to two years,construction decorate material will face the crisis which never face of befor.Now some big aluminium composite panel and aluminium coil factry have been close down, it should be attached importance.

*Aluminum History: Aluminum is in the 1825 Danish scientists have “HCO ersted” first discovered, has been 160 years of history.

*aluminium composite panels including：mirror aluminium composite panels, plastic stainless steel plates, steel-plastic plates, plastic plates of copper, self-cleaning nano-aluminum-plastic panels, fire aluminium composite panels, Fluorocarbon PVDF aluminium composite panels, aluminium composite panel pattern, double-sided aluminium composite panels, profiled wide aluminium composite panels, aluminium composite panel convex surface, the external walls of plate of aluminum-plastic Kong Wen ﹑ punching aluminium composite panel ﹑ high-aluminium composite panel , Chameleon aluminium composite panel ﹑ antistatic aluminium composite panel, the drawing board ﹑ silver aluminum-plastic drawing board, and other aluminum-plastic, high-grade aluminium composite panel.

*The minimum quantity of an order for the Shaped specifications aluminium coil: 6-8ton/furnace, the minimum quantity of an order for the aluminium coil is between 6-8ton.

*the method of how to calculate the length of the aluminium coil: weight ÷ density of the aluminium(2.71) ÷ width ÷ thickness= the length of 1 ton aluminium coil

*ACP name: Domestic as aluminum composite panels, known as the aluminum or composite materials (aluminium composite panels), also referred to as aluminum-plastic plate (aluminium composite materials). In Europe, the United States, Japan and other countries and regions on the direct use of the trademark name, for example, in some European countries known as ALUCOBOND, in the United States called REYNOLDS, in Japan known as the ALPOLIC.

*Aluminium composite panel exports increased trade friction, increasing pressure on exports, For example: Turkey restrict exports of Chinese aluminium products.

*The states macroeconomic regulation and control, against the property market intensified, further intensify the pressure on building materials.

*Aluminum and aluminum alloy state code

F × ×: free processing status

O × ×: annealing state

H × ×: state work-hardening

W × ×: Solid-state melting heat treatment

T × ×: heat treatment status (as distinct from F, O, H state)

*Aluminum characteristics: Al has many excellent properties, such as the density of small, high-strength, corrosion resistance, and easy processing and surface appearance, oxidation can be colored or decorative coating the surface coating treatment.

*Aluminum alloy shop sign

1 × × × series: pure aluminium (aluminium content not less than 99.00%)

2 × × × series: copper as the main elements of aluminum alloy

3 × × × series: manganese as the main elements of aluminum alloy

4 × × × series: silicon as the main elements of aluminum alloy

5 × × × series: magnesium as the main elements of aluminum alloy

6 × × × series: magnesium alloy as the main element and Mg2Si phase for the strengthening of aluminum alloy

7 × × × series: zinc as the main elements of aluminum alloy

8 × × × campaign: to the other elements as the main elements of aluminum alloy

9 × × × series: Stand-alloy Group

Grade the second letter that the original aluminum alloy or modified, the last two digits of that grade the last two digits to identify the same group of different aluminum alloy or aluminum that the purity.

1 × × × campaign that brands the last two digits: the minimum content of aluminum percentage points. Grades of the second letter that the original version of the aluminum case.

2 × × × ~ 8 × × × series brands of the last two digits of special significance not only to distinguish: the same group of different aluminum alloy. Grade the second letter that the original version of the aluminum case.

*H × × state of the breakdown:

H behind the first figure said: access to the state''''s basic processes, as shown below.

H1: pure state work-hardening

H2: work-hardening and the incomplete state of annealing

H3: work-hardening and stability of the state address

H4: work-hardening and painted with state

H second place behind the figures: the products that work hardening degree. Such as: 0 to 9 on behalf of increasingly hard work hardening

*strip of aluminum alloy rolled plate: By rolling temperature can be divided into hot, warm rolling (rolling in temperature) and cold-rolled . The mill arrangement can be divided into single-rolling, semi-continuous rolling and continuous rolling.

*The thickness of aluminum Category: Thickness of greater than 80 cm thick as special Thickness of 4 ~ 80 mm thick as Thickness of 0.2 ~ 4.0 mm known as the plate Thickness of less than 0.2 mm known as the aluminum foil

*PVDF paint roller Tu: PVDF paint roller Tu no domestic paint, all foreign-owned enterprises is the production of paint. Up to now, domestic PVDF coatings for Mainly the United States should be to the PPG paint company, Sweden Berg, the U.S. WALSPAR (Weishi Bo) and Aksu. Nobel Dole Company. Is still strictly to the production permit system, in only a handful of domestic companies through the certification.

*PVDF fluorocarbon paint performance: 1, excellent resistance to ageing of outdoor 2, good resistance to environmental aging properties 3, very good impact resistance, anti-fungal and anti-erosion of 4, good corrosion resistance

*Color coated Al Coil good or bad quality of identification: Surface indentation,-prints, convex, and other anomalies: not obvious Tu leakage, penetrating coating damage: do not allow Bellows: do not allow Bubble (≤ 10 mm): do not allow Defects (≤ 3 mm): ≤ 3 mm a / m2 Scratch: do not allow Abrasion: do not allow The total number of abrasions, scratches: do not allow Color: not obvious

*Aluminium composite panel by our Company in 2008 in Building Materials Test Center of the entire sampling qualified. With GB / T 17748-1999 standard wallboard Excellence for Chinese and foreign technical indicators requirements.

*Aluminium composite panel to the definition: Refers to aluminum and plastic compound from a sheet metal, concrete is aluminium and plastics core material under the conditions of a certain process through a dedicated adhesive Adhesive compound from the plate. Actual production is generally when the first panels are used to, back to aluminum paint, and then with plastic core material Compound. General panels are coated decorative coating, protective coating the back plate coating.

*good or bad quality of the aluminium composite panel identification: 1. Aluminum skin thickness: If Al-0.5 mm thick, the actual measurement should, aluminum 0.5 mm thick fluorocarbon paint + 0.025 mm = 0.525 mm (the total thickness of aluminum), 0.5 mm thick at the end of aluminum. 2. Fluorocarbon paint (PVDF): at least two-Tu, more than 70 percent of perfluorocarbons in the surface layer of paint Guadiao also a primer. Thickness by measuring,> 0.025 mm. Cashi 200 with butanone not reveal at the end. 3. Nano-dust-proof paint (NANO PVDF): at least two-Tu, thickness> 0.025 mm, with marker and write, can be completely wiped clean. 4. Polyester paint (PE): thickness by measuring> 0.016 mm, with butanone polished 100 not reveal at the end. 5. Polymer adhesive film: The United States PUPONP raw materials,tear aluminum skin, will find that the aluminum skin with plastic on the uniform distribution of white villous polymer, and the Rally> 7 N / mm. 6. Soft plastic: the translucent-like, slotted Paochu plastic litter, with a more transparent, is zoned a broken aluminum skin, folding aluminium composite panels, aluminum skin will be broken, but the plastic will not be broken, and round-trip discount numerous. 7. Protective film: double-composite film, 0.09 mm thick, tore off the protection film, a smooth hand.

APCP the bonding material: APCP the bonding material known as the polymer membrane, DuPont by the United States and South Korea Shin Kong production companies. Performance: easy to reach a certain temperature when melting; better thermal stability, in the melting temperature of decomposition does not occur, penetrate into the aluminum skin And the plastic middle and lower reaches a certain temperature, to glue, a certain durability, heat and cold, and a certain flexibility Sexual.

ID　：

Pass：

Code：


	Aluminium Composite Panel·Metal Decorating Thermal Insulation Panels
	Tel:0086-519-88492822 0086-519-88491822-8001
	Fax：0086-519-88493822
	Color Coated Aluminiam Coil·Color Drawa The Aluninium Plank
	Tel:0086-519-88780622 0086-519-88491822-8008
	Fax:0086-519-88491522
	Add:8#HengcuiRoad, HengLinTown, Changzhou City,JiangSu Province,China
	Web:www.shuangou.com
	E-mail:sale@shuangou.com
	Zip:213101

　Yahoo　 Tencent　 Sina　　Sohu　 google　 Baidu You're the guest